How To Paint A Distressed Door

This is the best step by step tutorial for how to paint and distress a laminate bookshelf without sanding and without priming.
The makeover is gorgeous – yous become a cute slice of furniture with a rustic finish!

If yous're wanting to give some character to a inexpensive 'ole piece of laminate piece of furniture and requite it a vintage await, I've got a super fun step-past-step tutorial for you on how to practice an astonishing furniture makeover. I tin can't wait to share it – this is definitely my favorite way to refinish a piece of furniture present!

I used this super easy (and and then fun!!) technique a few years ago when I redid a little laminate kitchen island we take. At that place are a lot of skeptics out at that place who call up you lot can't paint laminate furniture, but I think because this particular technique is supposed to make the slice expect old, chippy, and imperfect, there's a lot more room for imperfections in the painting.

Most 5 years ago, I remember standing in the line at Lowe's to get my paint color mixed for my outset piece of laminate. I was talking to a gentleman in line nearly what projects we were working on, and he assured me I wouldn't exist able to properly pigment a cheap laminate piece.

Well, I am so thrilled to say…he was totally wrong!

Just look at that gorgeous chippy and crepitation look! Ah! I just love it!!

I'm going to show you how to become that gorgeous crackle (you're non going to believe how!) and the distressed look, also as offer some tips as to how y'all tin hands add some finishing touches that actually assist dress up the piece.

Earlier we get started, let's accept a quick wait at what this bookshelf was similar before it got its makeover.

Nosotros got it at Goodwill for $25 when I was about viii.5 months pregnant. Planning DIY projects when you're almost to have another infant is always a skilful thought. 🙂

A few months after, I got to work painting it. I finally decided I wanted to paint it crimson scarlet, but like our front door.

Three different shades of blood-red (and three different coats of paint) later, I finally settled on this, merely I merely did Not like it. It kept me awake at night to think nigh this sad looking bookshelf that originally had far more than character in my head than in real life, so, I did what I exercise best…

I insisted information technology go another paint task. Simply, this time I knew it needed a dramatic makeover, and so I decided to follow the same painting/lamentable technique I used when I painted our kitchen island and give it that vintage chippy wait nosotros all love so much.

I tin finally sleep at night. Expect at this cute thing!

This post contains affiliate links for your convenience. You can read my full disclosure policy here.

Fix to become started?!

Materials You Need:

To Paint the Furniture

• Sandpaper (medium grit – about 120), or make the job way easier with an orbital sander + medium grit (about 120) sanding discs (come across note on Stride i about sanding)
• Quart of latex paint (I used Valspar Signature from Lowe's)
• 2″ Paintbrush for painting the colour of the furniture (angled might exist best depending on how many grooves you have)
• Foam rollers (go 2 in example you wear the first one out) – get ones that say they're for chiffonier and doors.
• Paint tray
• Acrylic paint (the colors you want for distressing – I used nighttime brownish, cream, and gold)
• Foam paintbrushes (at least 2-iii)
• Old paint brush for distressing
• At least one bottle of Elmer's glue (I tin can't speak for other brands – I've merely used Elmer's when I've distressed laminate furniture, so that's what I'd stick with!)

To Exercise the Wood Plank Backing (if you're doing this office)

• Wood planks (enough to fit the dorsum of the article of furniture – this is what we used)
• A wood saw to cut the planks the width of the piece of furniture
• Wood mucilage
• Wood stain (the pocket-sized 8oz container was enough for my projection)
• Old rag for staining
• Old paint brush for lamentable
• Cream-colored acrylic pigment for distressing
• Orbital sander with low dust (sixty-80) hook & loop sandpaper discs
• Nail gun & air compressor (or y'all could try using liquid nails if you don't have a nail gun)

To finish it off:

• Woods flourish pieces
• Pretty cabinet door knobs

Stride 1: Sand to remove paint OR lightly sand to roughen the surface

If you're as crazy as I am and have a piece of laminate article of furniture you lot've painted three times and now want to finally redo it to where you actually similar the finished product, and then the first step we demand to do is sand down all that paint. I admittedly recommend using an orbital sander for this process – it will make your life so much easier!

If you're painting direct on the laminate (equally in, the furniture doesn't have a coat of paint on it in demand of removal), so you don't need to practise as much sanding. I'd still recommend that orbital sander, but regular 'ole medium grit (near 120) sandpaper volition be fine. Just lightly sand the entire piece to roughen it upwardly a scrap – don't spend too much time on that.

Stripping the ruby away:

I definitely sanded this down fairly well because of the three coats of red paint that I had originally put on it, merely it really doesn't need this much sanding otherwise.

1 of my cutie pies helping me!

Step 2: Wipe Down Article of furniture and Begin Painting

After you sand your piece, give it a good wipe-down with a damp rag, followed up by a dry one. Once you've wiped it all down, it'due south ready for some paint! And yes, utilize the same quart of latex pigment you'd use to paint a wall. Endless color options!

When you paint, yous'll starting time start out past using a paintbrush – probably an angled 1 – to paint in the crevices of one expanse of the bookshelf. You'll immediately follow upward with a cream roller. This will help give it a shine, flawless end. Just proceed painting in sections until you finish blanket the entire piece.

Yous'll likely demand to give information technology at least 2 coats – I call up I did iii for this bookcase. The great matter is, latex paint dries pretty chop-chop, and so it didn't take me long to give this thing a few coats. By the time I was finished with one coat, the office of the bookshelf where I started my painting was already dry out plenty, so I could just start right back over to practice my 2nd coat.

Once again, just make sure you're painting with a cream roller, following up over brush strokes and just being conscious of whatever paint drips, and y'all'll get a great finish just like I did.

Footstep 3: Paint Spots with Acrylic Paint

At present it'southward time for the fun function! One time the pigment is completely dry and you've finished the coats you demand to give your furniture a thorough paint task, go your acrylic paints that yous're wanting to use for the distressing – these are the colors that you'll want to testify upwardly in the crackles of the paint. Equally you lot can see, I chose brownish, gold, and cream.

You'll but beginning choosing some random areas on your furniture to drop some pigment similar this:

And then you lot'll immediately showtime brushing it on with the cream paintbrush. You can see I fabricated my paint marks in random shapes and but placed them throughout the bookshelf.

After painting the night chocolate-brown, I added some hints of gold and cream, equally I wanted those colors to also pop through the crackled blue paint.

Past the finish of painting all the splotches, your article of furniture volition look similar a giraffe. That's how you know you're doing information technology right! 🙂

Allow the acrylic pigment completely dry earlier moving onto the next step. It dries really quickly, merely y'all practice want to make sure it's 100% dry out earlier yous move on, or else the next steps won't turn out as well.

Stride four: Spread the glue & pigment over it to make the crackles

And now for the reaaaally fun function! Once all of the dark-brown painted spots (or whatever color you lot chose for the spots) are completely dry, yous can brainstorm to start the crackling procedure.

Ok, let'due south get cracklin'! This is how nosotros do it: with Elmer's Glue. So sophisticated, huh?

You'll showtime squeeze a generous amount of glue onto each spot in one area of the furniture. You'll work in batches on this part – y'all don't want to do all of the mucilage on all of the spots at once unless your piece of piece of furniture is pretty small, merely because y'all don't want the glue to dry as well much before moving onto the side by side step.

And so, after you drizzle a proficient amount of glue onto your spot, you're going to employ a foam paint castor and spread information technology all over the spot. No demand to be really precise on this pace – just spread information technology enough then that it covers the spot.

And do that aforementioned technique for all the spots in 1 area of the furniture. Allow the glue sit down for about 25 minutes (this is going to vary depending on your weather when you're painting your shelf; when I painted this, information technology was probably nigh 85-90 degrees outside with a niggling bit of humidity). The bottom line is, you desire the glue to have a little flake of "setting time" on the spots, but you lot do not want it to become dry out. In order to get that pretty crepitation, the glue however needs to be pretty tacky to the touch.

And so, later you've given your glue about 25ish minutes to set, yous're going to become your cream roller (yes, the roller, NOT pigment brush), liberally coat it with the primary color you used for your furniture, and run it over the spots with the mucilage.

You want to completely coat it, and you'll recall it looks bad at first, but that's ok. I hope, when information technology dries, it'll look way better! Subsequently a minute or two of painting over the gum, you'll notice the pigment brainstorm to crackle.

And it'll just keep crackling!

You'll repeat that for all of the spots – glue starting time, let it set up for a bit, and then run over each spot with a generous helping of the main color paint on the roller brush. Then, let the paint completely dry on your furniture before yous brainstorm giving it more of a distressed look with the acrylic pigment.

Step v: Distress with by dry out brushing

Once all of the paint/glue is completely dry on the article of furniture, squirt some of the acrylic paint you used for the crackles (or, if you didn't use brown, aureate, and cream for the crackles, yous'll probably want them here) onto a large piece of cardboard. You'll gently dab an old paintbrush into the colors, wipe it off really well onto the cardboard (less is more than when it comes to this process – yous tin can always come back and add together more pigment later), and so begin gently running your paintbrush up and downwards on the furniture.

You tin can tell I painted in some crisscross patterns on there every bit well. I thought that'd help give information technology more dimension and add to the vintage look.

You'll repeat this procedure on the unabridged piece until you're pleased with the full distressed look.

One time yous've distressed the whole piece with the dry castor technique, you're prepare to first adding the bankroll!

Pace 6: Add the bankroll

I used these wood planks that I had already assembled together from a prior project. Later I didn't end up needing them for that project, I realized they'd be perfect as backing for this.

After gluing all the planks together with wood gum (they fit together kind of like a puzzle piece), I stained them with a light forest color. Later on the stain dried, I went back and dry out-brushed these splotches of white all over them, and then used my orbital sander to roughen them up a scrap. I love that tool! Seriously, how I redid all this furniture before owning one is beyond me.

Afterward getting the planks to expect the way I wanted them, we measured them to run into where we needed to trim them in society for them to fit flush on the dorsum of the bookcase.

Aaron trimmed them quickly with his table saw and so nosotros nailed them to the back of the bookcase with his smash gun. You lot could probably use liquid nails in this pace if you don't have a blast gun – the wood pieces we used weren't actually heavy, then liquid nails might exist a good back-up selection.

Step 7: Add the flourishes

The bookcase is virtually finished! Now, just need to add the finishing touches! I absolutely beloved these woods flourishes from Hobby Lobby – I've used them numerous times when refinishing plain furniture. They do so much to clothes up a piece!

Beginning, I gave them a base of operations coat of brownish with the acrylic paint…

So I ran some gilt over them using that dry brush technique…

Then I glued them with wood glue to the cabinet doors, then used the dry brush technique once more with the blue paint of the bookshelf. I wanted them to stand up out, simply I didn't desire them to have such a stark difference, and then adding that dry brush blueish on there helped blend them into the furniture and make them seem like they've been there the whole time!

Don't they add so much character?! Aren't you just itching to get started on your piece?!

Stride eight: Add cabinet knobs and adhere the doors to the bookcase (if applicable)

I love using dressy knobs for the article of furniture I refinish. Just like the wood flourishes, for such a little amount of coin, they add so much to each piece! If your furniture calls for some re-assembly, this is the time to do it. Go ahead and put those knobs on, re-attach doors to the frame, and then you're all done!

Now it'southward movement-in day! Time to move your piece of furniture in from outside/the garage into your business firm and bear witness information technology off!

I love that the end result of this procedure reveals so much item in the furniture, simply that the process itself was SO piece of cake and simple!

Then pretty! And yes, I absolutely love my "vintage" record histrion (also a CD/Cassette (who uses those anymore?!) thespian and a radio) – we employ it ALL the fourth dimension. My kids love information technology, so when we were placing it in our business firm, we had to brand certain we placed it low enough to where they could achieve information technology to plow it on. That thing gets a lot of use in our house!

It is totally non vintage (it's like 7 years old…it's not from the 50s!), but I love that information technology's got that vintage vibe to it. You can detect them for very reasonable prices – I was shocked at how inexpensive ours was.You can go check out some similar styles here if y'all like the expect of ours.

Here are more than particular shots so you can see how the finished product actually looks:

Love it! Don't you want to become pigment your own at present?! Grab your car keys, run to the nearest Goodwill or 2nd hand shop, and see what piece of junk you can plow into a total treasure!

If you enjoy refinishing items to give budget finds an upscale look, check out how nosotros completely made-over our builder-course kitchen cabinets for well-nigh $150!

Honey this idea and desire to retrieve information technology for later?! Be sure to pivot this to your favorite Pinterest board!

Source: https://theamericanpatriette.com/how-to-paint-and-distress-a-laminate-bookshelf-without-priming/

Posted by: walkerweled1976.blogspot.com

Share this post